Graziano Trans Cooler Thread Specs

[Mark Setter]

Does anyone know the thread specs on the Graziano Transaxle cooler inlets and outlets? I know what they are not - AN8 or AN6.

 

[Jerry Jackson]

<style type="text/css">p { margin-bottom: 0.1in; direction: ltr; color: rgb(0, 0, 0); line-height: 120%; text-align: left; }p.western { font-family: "Liberation Serif",serif; font-size: 12pt; }p.cjk { font-family: "Liberation Serif"; font-size: 12pt; }p.ctl { font-family: "Liberation Serif"; font-size: 12pt; }a.western:link { }a.cjk:link { }</style>

Mark,

Graziano Oil In/Out ports M16 x 1.5
You can buy straight and angled connectors with this metric thread adapted to AN.


In case you need it
<style type="text/css">p { margin-bottom: 0.1in; direction: ltr; color: rgb(0, 0, 0); line-height: 120%; text-align: left; }p.western { font-family: "Liberation Serif",serif; font-size: 12pt; }p.cjk { font-family: "Liberation Serif"; font-size: 12pt; }p.ctl { font-family: "Liberation Serif"; font-size: 12pt; }a.western:link { }a.cjk:link { }</style>
Clutch slave inlet M12 x 1.5​

 

[Mark Setter]

Wow! Thanks! I will start looking for the adapters.