Ramlift

[Michael Fling]

Ramlift Questions:

1. The Ramlift cylinders have 2 ports. 1 goes to the lift motor and the other is plugged. Does it matter which port is plugged?

2.The exit line from the Ramlift cylinder can be adjusted as to where they exit. They can exit towards the front, towards the car, or to the rear. What is the preferred exit position?

 

[Michael]

Ramlift Questions:

1. The Ramlift cylinders have 2 ports. 1 goes to the lift motor and the other is plugged. Does it matter which port is plugged?

2.The exit line from the Ramlift cylinder can be adjusted as to where they exit. They can exit towards the front, towards the car, or to the rear. What is the preferred exit position?

Good morning Michael.

I've learned that it's easier to call Simon @ Ramlift. He machines all the parts, and can answer your questions right away.

Simon Hameka
(281) 923 3470
ramliftpro at comcast dot net.

Hope this helps.
Take care.

Mike

 

[Fran Hall RCR]

Michael.
I actually said the same thing to Mike via email yesterday morning.

Simon is very easy to chat to and very helpful

 

[Allan]

Ramlift Questions:

1. The Ramlift cylinders have 2 ports. 1 goes to the lift motor and the other is plugged. Does it matter which port is plugged?

2.The exit line from the Ramlift cylinder can be adjusted as to where they exit. They can exit towards the front, towards the car, or to the rear. What is the preferred exit position?

Plug either port, doesn't matter.
The exit line will route best facing foward.

 

[Michael Fling]

Thank you Allan...