Wheel Arch Closing Panel Assemblies

[Adam C.]

A small batch of wheel arch closing panel assemblies are almost complete. These things look simple, but they are a pain to make!
They will include the 10 spring mounting tabs that are bonded to the fiberglass bodywork.

I'm thinking about offering them 2 ways:
1) with the aftermarket quarter-turn fasteners pictured along with springs.
2) Without the fasteners (but with all else) for those that have sourced the original EHF6-60's.

Let me know if you are interested to help figure out how many to make of each.

 

[Charlie M]

What do you expect the price to be with the fasteners?

 

[Adam C.]

I won't know exactly until they are in the box and ready to ship, but it looks like ~$350 with the quarter turns, springs, rivets all installed. Also includes powder coating of course.

 

[Davidmgbv8]

Adam, As with the eyeball vents, I started down this path but did not finish mine. I had yet to make the divot for the headlight. I will pull mine out and advise.

 

[Adam C.]

Finally finished! It feels good to be on the other side of this project. It's the simple-looking ones that you have to be wary of.

Wheel Arch Closing Panel Assemblies

The panel assemblies that close the rear of the headlights from the front wheelhouse. Used on all MKI, MKII and Gulf cars. Made from original prints. Features: All parts made to original prints All hardware included Laser-cut 0.040" thick aluminum Correct-style solid rivets in correct...

llamabite.com

Only 7 unsold sets survived the forming process. Not sure I would make them again.

I have a set or two with NOS Dzus fasteners. Reach out if interested, but be prepared for sticker shock.