slc alignment

I took mine to a alignment shop with the specs from the manual, 4 hours later and 380 bucks, its perfect. Did not attempt do to this my self.
 
This is what I used. Use a fastrax and a set of Longacre toe plates and you'll get it fairly close with some patience.

Caster: +4.5* (front & rear)

Camber: -0.25* (front & rear)

Toe: 1/16’’ toe in (front & rear)

Tire Pressure: 25 Rear, 24 Front
 

Howard Jones

Supporter
Alex, Interesting. What wheel widths are you running at .25 neg camber and I assume this is a street tire setup. What would you be using for tires?

This seams like a nice conservative setup by the way. I think it would be a useful base line for just about anybody with a road use SLC looking for good tire wear.
 
Back
Top