slc alignment

[Al Wohlstrom]

I've put in searches for slc alignment, alignment, etc, without much luck. Are there any good posts about this? Thanks in advance.

 

[Garry 20 B]

I took mine to a alignment shop with the specs from the manual, 4 hours later and 380 bucks, its perfect. Did not attempt do to this my self.

 

[Alex]

This is what I used. Use a fastrax and a set of Longacre toe plates and you'll get it fairly close with some patience.

Caster: +4.5* (front & rear)

Camber: -0.25* (front & rear)

Toe: 1/16’’ toe in (front & rear)

Tire Pressure: 25 Rear, 24 Front

 

[Howard Jones]

Alex, Interesting. What wheel widths are you running at .25 neg camber and I assume this is a street tire setup. What would you be using for tires?

This seams like a nice conservative setup by the way. I think it would be a useful base line for just about anybody with a road use SLC looking for good tire wear.

 

[PeteB]

The search function isn't...great.

Here's an earlier thread on alignment: http://www.gt40s.com/forum/slc-clubhouse/42421-wheel-camber-settings.html

When you find a thread you know you'll want to find again, use the "thread tools" tab to subscribe to it.

 

[Bill]

If you want a simple low cost way to do an alignment, see Rumbles SLC Build thread post #434 on 5/24/13.

 

[Al Wohlstrom]

Thanks for the help!