which Infos do you need?
I have attached a German Manual ....
Is it possible to find that in english?

which Infos do you need?
I have attached a German Manual ....
How do you get one????which Infos do you need?
I have attached a German Manual ....
Is it possible to find that in english?<!-- google_ad_section_end -->
Also available for DQS (01E) maybe ????
How do you get one????
And how much?
Wa=hat car did it come in???
Thanks Scott, but what do you mean by weaker when the tourqe capacity is higher? I thought it was the torque that killed the boxes?
___
Sorry 'bout that, I saw now that you mentioned two different boxes
Hi again,
is it possible to swap a Audi V8 Rear Torsen into the Audi 2,7 TDI Box (0A2) ?
Into a Front wheel drive Audi 016 Gearbox they have done it
924Board.org :: View topic - Cheap Limited slip for 016
are the Diffs equal (size)? 016 and 0A2
Jub
But what is the best 01E? Have read that there is a narrow and wide 1st gear, a flexible and a non flexible driveshaft, 2 different gear ratio sets, 5 and 6 speed, pretty many codes like "DQS" "CBM" "DSY"... And have seen that it's behind many different engine alternitivs like a Audi A4 with a 1,9l 85kW or a Audi A8 with a 4,2l 265kW engine.
So what car and year have the box that would be the most preffered?
Nice manual !
Also available for DQS (01E) maybe ????
Jub
Are you running an open diff or some sort of limited slip???
how much power are you putting thru that box?
Guys,
I have found a Audi 2.5 TDI 6-speed "DQS" box which i might buy.
Question; What does the DQS stands for? And do someone out there know the C-C measurement between the inner CV-joints?
Thanks
/// Peter