Adjusting Graz shifter cables

[Dan Carter]

Does anyone have the steps needed to adjust and set the Graz transaxle with the cable shifter?

Can't seem to find the details.

:idea:

Thanks

 

[Will Campbell]

I don't have a Graziano, but for the Ricardo, the directions from the Ford GT manual are to mount the cables to one end, center the shifter lever so that it is in the middle of the up/down and left/right range, then adjust the ends to attach to the loose end (the shifter or the transaxle). The ends should have small joints that are threaded, so the adjustment is easy to do.

I expect that idea works for the Graziano as well, or really any other transaxle.

Once you have the cables adjusted, test them by going into all the gears, and using the clutch (and a running engine) to verify that the car stays in gear when the clutch is let out slowly. Adjust as needed to get an even and consistent engagement.