I think this is the best way to run the cooling setup as I'm basically copying what I did with my cobra, but I wanted to get your guys' thoughts.
*remote expansion tank = Moroso 63656 - Moroso Cooling System Expansion Tanks - Overview - SummitRacing.com
Basically
1.5'' stainless piping from the engine to the bottom ports in the radiator
1/4'' npt top driver port in radiator is plugged
top passenger port has -8 line going from radiator to remote expansion tank
remote expansion tank has -10 line going form bottom of it to heater-out port on waterpump
top of remote expansion/fill tank goes to bottom of puke tank
Remote expansion/fill tank is mounted on firewall; puke tank is mounted at the highest point in the cooling system
*remote expansion tank = Moroso 63656 - Moroso Cooling System Expansion Tanks - Overview - SummitRacing.com
Basically
1.5'' stainless piping from the engine to the bottom ports in the radiator
1/4'' npt top driver port in radiator is plugged
top passenger port has -8 line going from radiator to remote expansion tank
remote expansion tank has -10 line going form bottom of it to heater-out port on waterpump
top of remote expansion/fill tank goes to bottom of puke tank
Remote expansion/fill tank is mounted on firewall; puke tank is mounted at the highest point in the cooling system

Last edited: