Side Repeater Lights Help Required

[Robbie W.]

I am looking to replace the orange side repeater lights on my GT40 (Photos attached) with repeaters that would give a more in period look. I have done some research and please correct me if I am wrong but most original GT40'S don't seem to have them fitted in this position. I have seen that the Gulf cars do have them fitted just forward of the front the wheel.

Does anyone know if the Gulf side repeater lights are still available and where to obtain them or of any other make/type of side repeaters that have been used on the GT40's that would look more in period than these?

Thank you.

Robbie.

 

[Ian Anderson]

Stafford Vehicle Components Part Categories

Categories

www.s-v-c.co.uk

I would presume something along the L488 items

Ian

 

[Andy Sheldon]

We have them available along with the correct mounting brackets
Thanks
Andy

 

[Robbie W.]

Stafford Vehicle Components Part Categories

Categories

www.s-v-c.co.uk

I would presume something along the L488 items

Ian

Thank you for this link Ian. They have quite a range for me to take a look at.

Robbie

 

[Robbie W.]

We have them available along with the correct mounting brackets
Thanks
Andy

Thank you Andy, I will have a look at these on your website.

Robbie.

 

[Andy Green]

Small and unobtrusive, chrome ring available for a period look
Rgds,
Andy

Micro 28mm Round Push in LED Side Repeaters PAIR

IVA OK 'SAE DOT P2PC' marked. To mount, simply push the rubber surround through a 20mm hole in your panel then push the LED lamp unit into it, locking it all in place. Diameter 28mm. Front projection 8mm. Rear projection (not including wire) 11mm. Maximum panel thickness 5mm. 150mm flylead. 12...

www.carbuilder.com

 

[Ian Anderson]

Thank you Andy, I will have a look at these on your website.

Robbie.

Great company..normally very helpful and responsive.

 

[Robbie W.]

Small and unobtrusive, chrome ring available for a period look
Rgds,
Andy

Micro 28mm Round Push in LED Side Repeaters PAIR

IVA OK 'SAE DOT P2PC' marked. To mount, simply push the rubber surround through a 20mm hole in your panel then push the LED lamp unit into it, locking it all in place. Diameter 28mm. Front projection 8mm. Rear projection (not including wire) 11mm. Maximum panel thickness 5mm. 150mm flylead. 12...

www.carbuilder.com

Hi Andy, thank you for suggesting these. They would be ideal, the problem is that my existing ones have an odd oblong shaped hole behind them and these wouldn't cover the existing hole which is a shame.
Regards,
Robbie.