Total Flow Rating of Weber 48 IDA's

Total Flow Rating of Weber 48 IDA\'s

Does anyone know the total CFM ratings for the Weber 48 IDA setup?

Thanks
Bill D
 
Re: Total Flow Rating of Weber 48 IDA\'s

well this would be very interesting data.does also anybody know of the flow of 44IDF webers.
 
Re: Total Flow Rating of Weber 48 IDA\'s

From Carburetor Performance by Forbes Aird and Malcolm Elston:

[ QUOTE ]
Weber does not rate its carbs on the basis of cfm -- with as many as 91 (13x7) different possible permutations of main and booster venturies within one DCOE bore size, which combination should the manufacturer rate?

[/ QUOTE ]

/ubbthreads/images/graemlins/shocked.gif
 

Ron Earp

Admin
Re: Total Flow Rating of Weber 48 IDA\'s

The total flow rating of all four I think would be a mote point. Each cylinder can only see one barrel of one carb. I would think that the maximum flow rating of each type would be useful - if a 48IDA can fit a maximum of a 44mm choke then the max flow of the carb with the 44mm choke installed would be useful.

Ron
 
Re: Total Flow Rating of Weber 48 IDA\'s

ON 48IDA each barrel flow 330cfm with std horn and 42mm choke,with same choke and custom horn:345,with same choke,custom horn and bored to 51.5mm:362cfm.Noted size of chock don't affect serioosly flowing.All these tests are tested on superflow flowbench.
Bernie
 
Back
Top