Blwngt40's latest activity

Looks great to me…. Think of it as any other “flaw” in your cars - 99.99% of the time, you’ll be the only one to notice it/them…

Aluminum Putty 10610. Like you said welding plugs is best idea as long as you have access a MIG or TIG that has A/C capability. .

Hi would like to find out the exact wheel and tiresize of those two cars. Both of them probably have some means for limiting the...

SGT/AK based chassis. Very clean welds.

Very, very slow progress at the moment. Still waiting on Quaife transmission so I can properly locate engine mounts. So pretty much no...

See PM

Everything on mine so far has been to cut, refit, and weld back up. So nothing on mine is true to spec but fit to appear as I can...

The front pivots were identical to the rear just had a section cut off. The pivot point was a pin spacer that protruded from the...

Thank you for that input Randy. I believe I will go with the front pivoting. I am going to make them per the drawings from the GT40...

If you want to be more like the originals, the slide-on bobbin mounts are the way to go. But… If you ever want to open that front clip...

Some color bleeding came through that wasn't visible till i put on the white... ugh..

Charlie, You would have to ask Protolabs, they printed it, it is a resin print. The silver is a metalic flake that is in a testers...

Yes.

Started painting the backside and rough machined out the bezel today.

Welcome to the building fun! I believe there are four of us in Ohio currently building our 40's.